SO production tests

cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg

@@ -24,7 +24,7 @@
 		"feedbackPolarity" : 1,
 		"feedbackLimitkHz": 225,
 		"lmsGain": 7,
-		"att_uc": 12,
+		"att_uc": 0,
 		"att_dc": 0,
 		"amplitude_scale": 12
 	},
@@ -49,7 +49,7 @@
 		"feedbackPolarity" : 1,
 		"feedbackLimitkHz": 225,
 		"lmsGain": 7,
-		"att_uc": 12,
+		"att_uc": 0,
 		"att_dc": 0,
 		"amplitude_scale": 12
 	},
@@ -74,7 +74,7 @@
 		"feedbackPolarity" : 1,
 		"feedbackLimitkHz": 225,
 		"lmsGain": 7,
-		"att_uc": 12,
+		"att_uc": 0,
 		"att_dc": 0,
 		"amplitude_scale": 12
 	},
@@ -99,7 +99,7 @@
 		"feedbackPolarity" : 1,
 		"feedbackLimitkHz": 225,
 		"lmsGain": 7,
-		"att_uc": 12,
+		"att_uc": 0,
 		"att_dc": 0,
 		"amplitude_scale": 12
 	},

cfg_files/rflab/rflab_smurf_startup.cfg

@@ -3,14 +3,14 @@ shelfmanager=shm-smrf-sp01
 set_crate_fans_to_full=true
 # COMTEL max fan level is 100, ASIS is 15, ELMA is 15
 ## COMTEL in RF lab
-max_fan_level=100
+max_fan_level=25
 
 # more often used
 attach_at_end=true
 configure_pysmurf=true
 reboot=true
 using_timing_master=false
-start_atca_monitor=true
+start_atca_monitor=false
 disable_streaming=true
 parallel_setup=false
 
@@ -26,19 +26,26 @@ save_state=false
 # go go go
 cpwd=$PWD
 
+# This has run.sh and one copy of the pysmurf repo. run.sh is used in
+# tmux before running ipy and instantiating SmurfControl. The .cfg
+# file below is taken from here.
 pysmurf=/home/cryo/docker/pysmurf/dev/v5.0.2
 
+# This is turned into "shm-smurf-sp01" so we can hit it with clia.
 crate_id=1
 
+# This gets put into slot_cfgs in shawnhammer.
+# Param 1 is slot number
+# Param 2 is used for ?
+# Param 3 is the cfg file to get from the pysmurf variable above.
 unset slot_cfgs
 read -r -d '' slot_cfgs << EOM
 6    /home/cryo/docker/smurf/stable/slotN/v5.0.2        cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
 EOM
-#3    /home/cryo/docker/smurf/dev_fw/slotN/v4.1.0        cfg_files/rflab/experiment_rflab_onlyBay0.cfg
 
 #pysmurf_init_script=scratch/shawn/scripts/init_rflab.py
 
 tmux_session_name=smurf
 
-thermal_test_script=scratch/shawn/thermal_test.py
+#thermal_test_script=scratch/shawn/thermal_test.py
 run_thermal_test=false

cfg_files/rflab/rflab_smurf_startup_stephen_test.cfg

@@ -26,13 +26,13 @@ save_state=false
 # go go go
 cpwd=$PWD
 
-pysmurf=/home/cryo/docker/pysmurf/dev/v5.0.2
+pysmurf=/home/cryo/docker/pysmurf/dev/v7.1.0_prodtest
 
 crate_id=1
 
 unset slot_cfgs
 read -r -d '' slot_cfgs << EOM
-6    /home/cryo/docker/smurf/stable/slotN/v5.0.2	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
+3    /home/cryo/docker/smurf/stable/v7.1.0	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
 EOM
 
 #pysmurf_init_script=scratch/shawn/scripts/init_rflab.py

cfg_files/rflab/rflab_smurf_startup_stephen_test2.cfg

@@ -0,0 +1,45 @@
+shelfmanager=shm-smrf-sp01
+
+set_crate_fans_to_full=true
+# COMTEL max fan level is 100, ASIS is 15, ELMA is 15
+## COMTEL in RF lab
+max_fan_level=100
+
+# more often used
+attach_at_end=true
+configure_pysmurf=true
+reboot=true
+using_timing_master=false
+start_atca_monitor=true
+disable_streaming=true
+parallel_setup=false
+
+# Less often used
+# requires tmux-logging plugin
+enable_tmux_logging=false
+screenshot_signal_analyzer=false
+run_full_band_response=false
+run_half_band_test=false
+write_config=false
+save_state=false
+
+# go go go
+cpwd=$PWD
+
+pysmurf=/home/cryo/docker/pysmurf/dev/v7.1.0_prodtest
+
+crate_id=1
+
+unset slot_cfgs
+read -r -d '' slot_cfgs << EOM
+2    /home/cryo/docker/smurf/stable/v7.1.0	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
+EOM
+
+#pysmurf_init_script=scratch/shawn/scripts/init_rflab.py
+
+tmux_session_name=smurf
+
+#thermal_test_script=scratch/shawn/thermal_test.py
+#run_thermal_test=false
+
+script_to_run=scratch/stephen/full_band_response_AMCatten.py

cfg_files/rflab/smurf_startup_low_power_test.cfg

@@ -13,7 +13,7 @@ max_fan_level=100
 attach_at_end=true
 # don't configure pysmurf for the low power test because we want to
 # run setup for first time as a part of the test.
-configure_pysmurf=false
+configure_pysmurf=true
 reboot=true
 using_timing_master=false
 start_atca_monitor=true
@@ -29,18 +29,18 @@ write_config=false
 # go go go
 cpwd=$PWD
 
-pysmurf=/home/cryo/docker/pysmurf/v5.0.2
+pysmurf=/home/cryo/docker/pysmurf/dev/v7.1.0_prodtest
 
-crate_id=3
+crate_id=1
 
 unset slot_cfgs
 read -r -d '' slot_cfgs << EOM
-6    /home/cryo/docker/smurf/dev_fw/slotN/v5.0.2	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
+2    /home/cryo/docker/smurf/stable/v7.1.0	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
 EOM
 
 #pysmurf_init_script=scratch/shawn/scripts/init_rflab.py
 
 tmux_session_name=smurf
 
 # this script will run at the end of the hammer.
-script_to_run=scratch/shawn/test_new_carrier.py
+script_to_run=scratch/shawn/test_new_carrier.py

cfg_files/rflab/smurf_startup_low_power_test2.cfg

@@ -0,0 +1,46 @@
+shelfmanager=shm-smrf-sp01
+
+set_crate_fans_to_full=true
+# COMTEL max fan level is 100, ASIS is 15, ELMA is 15
+## COMTEL in RF lab
+#max_fan_level=50
+## ELMA in RF lab
+#max_fan_level=15
+## ASIS in RF lab
+max_fan_level=100
+
+# more often used
+attach_at_end=true
+# don't configure pysmurf for the low power test because we want to
+# run setup for first time as a part of the test.
+configure_pysmurf=true
+reboot=true
+using_timing_master=false
+start_atca_monitor=true
+disable_streaming=true
+parallel_setup=false
+
+# less often used
+enable_tmux_logging=true
+screenshot_signal_analyzer=false
+run_half_band_test=false
+write_config=false	
+
+# go go go
+cpwd=$PWD
+
+pysmurf=/home/cryo/docker/pysmurf/dev/v7.1.0_prodtest
+
+crate_id=1
+
+unset slot_cfgs
+read -r -d '' slot_cfgs << EOM
+2    /home/cryo/docker/smurf/stable/v7.1.0	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
+EOM
+
+#pysmurf_init_script=scratch/shawn/scripts/init_rflab.py
+
+tmux_session_name=smurf
+
+# this script will run at the end of the hammer.
+script_to_run=scratch/shawn/test_new_carrier.py

cfg_files/rflab/smurf_startup_thermal_test.cfg

@@ -15,6 +15,7 @@ attach_at_end=true
 # setup for first time as a part of the thermal test.
 configure_pysmurf=false
 reboot=true
+enable_tmux_logging=true
 using_timing_master=false
 start_atca_monitor=true
 disable_streaming=true
@@ -28,18 +29,21 @@ write_config=false
 # go go go
 cpwd=$PWD
 
-pysmurf=/home/cryo/docker/pysmurf/dev/v5.0.2
+# this is used in shawnhammer
+pysmurf=/home/cryo/docker/pysmurf/dev/v7.1.0_prodtest
 
 crate_id=1
 
 unset slot_cfgs
+
+# slot number
 read -r -d '' slot_cfgs << EOM
-6    /home/cryo/docker/smurf/dev_sw/slotN/v5.0.2	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
+6    /home/cryo/docker/smurf/stable/v7.1.0	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
 EOM
 
 #pysmurf_init_script=scratch/shawn/scripts/init_rflab.py
 
 tmux_session_name=smurf
 
 thermal_test_script=scratch/shawn/thermal_test.py
-run_thermal_test=true
+run_thermal_test=true

cfg_files/rflab/smurf_startup_thermal_test2.cfg

@@ -0,0 +1,49 @@
+shelfmanager=shm-smrf-sp01
+
+set_crate_fans_to_full=true
+# COMTEL max fan level is 100, ASIS is 15, ELMA is 15
+## COMTEL in RF lab
+#max_fan_level=50
+## ELMA in RF lab
+#max_fan_level=15
+## ASIS in RF lab
+max_fan_level=100
+
+# more often used
+attach_at_end=true
+# don't configure pysmurf for thermal test because we want to run
+# setup for first time as a part of the thermal test.
+configure_pysmurf=false
+reboot=true
+enable_tmux_logging=true
+using_timing_master=false
+start_atca_monitor=true
+disable_streaming=true
+parallel_setup=false
+
+# less often used
+screenshot_signal_analyzer=false
+run_half_band_test=false
+write_config=false	
+
+# go go go
+cpwd=$PWD
+
+# this is used in shawnhammer
+pysmurf=/home/cryo/docker/pysmurf/dev/v7.1.0_prodtest
+
+crate_id=1
+
+unset slot_cfgs
+
+# slot number
+read -r -d '' slot_cfgs << EOM
+2    /home/cryo/docker/smurf/stable/v7.1.0	cfg_files/rflab/experiment_rflab_thermal_testing_201907.cfg
+EOM
+
+#pysmurf_init_script=scratch/shawn/scripts/init_rflab.py
+
+tmux_session_name=smurf
+
+thermal_test_script=scratch/shawn/thermal_test.py
+run_thermal_test=true

scratch/shawn/full_band_response.py

@@ -5,6 +5,9 @@
 import sys
 import os
 import matplotlib.pylab as plt
+
+print("Inside full_band_response.py. Starting.")
+
 plt.ion()
 
 n_scan_per_band=5
@@ -69,7 +72,7 @@
             bbox_inches='tight')
 plt.show()
 
-save_name = '{}_full_band_resp_all.npy'.format(timestamp)
+save_name = os.path.join(S.output_dir,'{}_full_band_resp_all.npy'.format(timestamp))
 print(f'Saving data to {os.path.join(S.output_dir, save_name)}')
 np.save(save_name,resp_dict)
 

scratch/shawn/scripts/shawnhammer.sh

@@ -111,6 +111,8 @@ if [ "$set_crate_fans_to_full" = true ] ; then
     sleep 2
 fi
 
+echo "3"
+
 # use tmux instead
 # https://www.peterdebelak.com/blog/tmux-scripting/
 
@@ -207,6 +209,8 @@ tmux select-pane -t 0
 
 if [ "$reboot" = true ] ; then
 
+    echo "Rebooting."
+
     # deactivate carriers
     deactivatecmd=""
     activatecmd=""    
@@ -326,6 +330,8 @@ else
 	echo "-> Waiting for ethernet on carrier in slot ${slot} to come up ..."
 	cd $cpwd
 	ping_carrier 10.0.${crate_id}.$((${slot}+100))
+
+	echo "Starting serial slot ${slot} with pyrogue ${pyrogue} with config ${pysmurf_cfg}"
 
 	start_slot_tmux_serial ${slot} ${pyrogue} ${pysmurf_cfg}
 

scratch/shawn/scripts/shawnhammerfunctions.sh

@@ -67,6 +67,8 @@ is_slot_server_up() {
 }
 
 pysmurf_init() {
+    echo "Start of pysmurf_init"
+
     slot_number=$1
     pysmurf_cfg=$2
 
@@ -86,6 +88,7 @@ pysmurf_init() {
 	    exit 1	    
 	fi
     else
+	echo "Making temporary init script"
 	tmp_pysmurf_init_script=/tmp/psmurf_init_`date +%s`.py
 
 	# load pysmurf.client
@@ -301,6 +304,7 @@ is_rogue_server_up(){
     timeout_sec=10
     dockercmd="docker exec -it smurf_utils caget -w 1.0 -t smurf_server_s${slot}:AMCc:LocalTime -S"
     localtime=`${dockercmd}`
+    echo $localtime
     epochtime=`date "+%s" -d "$localtime" 2> /dev/null`
 
     if [ "$?" -eq "0" ]; then

scratch/shawn/test_new_carrier.py

@@ -7,13 +7,6 @@
 
 slot = S.slot_number
 
-wait_before_setup_min=1
-print('-> Waiting {} min before setup.'.format(wait_before_setup_min))
-wait_before_setup_sec=wait_before_setup_min*60
-time.sleep(wait_before_setup_sec)    
-
-S.setup()
-
 wait_after_setup_min=1
 print('-> Waiting {} min after setup.'.format(wait_after_setup_min))
 wait_after_setup_sec=wait_after_setup_min*60