Crypt_hw_serial

Software Serial Protection for Raspberry Pi

(This lib is to be used with SERIAL ST2W16)

Step-by-step:

1. Switch off your Raspberry Pi;
2. Attach device to GPIO according with image (device uses the GPIO Pins from 17 to 26);
3. Power on your Raspberry Pi;
4. Use set_key application to set up your private key; e.g. set_key A3768BF214E4CC897D901AA22FF69A34
5. Change the key_array, of file serial_check.h, according with previous key;
6. Function serial_number_check_procedure will check if stored serial match with input parameter sys_serial;
7. Compile your application linking with libCrypt_hw_serial.a e.g. gcc test.c -o test -L. -lCrypt_hw_serial